Healy Awards »
Applying Helmet Decals
Applying Helmet Decals
Before any decals can be applied, the surface area of the football helmet must be clean from dirt or dust. You can towel off the surface with water only and let dry.
Apply ProPrep™ helmet polish, following the instructions on the bottle.
ProPrep™ is a polish that doesn't scratch like acrylic-based waxes. Helmets are easier to keep clean and looking like new. Best of all, if you remove and replace helmet decals during the season, your helmet decals will remove easily and cleanly. Leaves no decal adhesive behind and prevents paint from being peeled off with the decal.
Applying the Decal
- Decal should be positioned on helmet so the bottom of the decal design rests 2” from top of helmet earhole.
- Press center of decal to helmet so only a small middle section is applied to helmet.
- Working from middle, out, press decal to helmet. Apply larger areas to helmet first then press smaller sections down. This will prevent buckling.
- When decal is applied to helmet, rub over entire decal with thumb to make sure it is completely pressed into place.
- If buckling occurs, gently lift up buckled area. Pull to straighten and reapply.
Download a printable version of this document to have handy any time you're applying Healy decals.