How to Apply Heat Press Helmet Numbers & Decal Accessories to Guardian Caps – Step-by-Step Guide

1. Apply Guardian Cap to football helmet.
2. Power on your heat press equipment.
3. Set the temperature to 285°F and adjust the pressure setting to medium to firm.
4. Cut out the number or decal accessory you plan to apply.
5. Remove the clear backing from the design and discard.
6. Apply temporary fabric glue to the area where the decal will be placed. Position the decal in the desired location on the Guardian Cap.
7. Apply heat using a handheld heat press at 285°F to gradually heat each portion of the logo.
8. Press for at least 5 seconds throughout the design, ensuring even adhesion across the entire design.
9. Carefully peel off and discard the clear application tape while still hot.
10. Smooth out any areas of the logo that are not fully adhered using the handheld heat press, being careful not to overheat or burn the decals.
11. Repeat the process for any additional numbers or decal accessories.

For recommendations on handheld heat presses or temporary fabric glue sticks, please contact us.