How to Apply Adhesive Side Decals to Guardian Caps – Step-by-Step Guide

1. Apply Guardian Cap to football helmet.
2. Carefully peel the decal from the backing paper, avoiding wrinkles and keeping fingers off the adhesive. Pro Tip: Use a hairdryer on a low setting to gently warm the decal for a smoother application.
3. Position the decal before applying by hovering over the cap without sticking it down to confirm placement.
4. Lightly place the center of the decal onto the cap without pressing it down fully.
5. Check alignment before securing—if repositioning is needed, gently lift the decal and adjust.
6. Press from the center outward using your thumbs or a decal applicator squeegee to smooth the decal into place.
7. Work in sections – Apply larger areas first, then press smaller sections down to prevent buckling or creases.
8. Repeat the process for the opposite side of the cap, ensuring both decals are evenly aligned.
9. Final Touches & Care Tips
• Double-check all edges to ensure they are firmly pressed down.
• Allow the decal to set for several hours before using the cap.
• Avoid excessive heat, such as storing helmets in hot cars, as it can weaken the adhesive.



By following these steps, your Guardian Caps will have a clean, professional finish, ensuring your team looks as sharp as they play!