How to Apply Custom Logo Heat Press Sheets – Step-by-Step Guide

1. Power on your heat press equipment.
2. Set the temperature to 285°F and time to 5 Seconds.
3. Adjust the pressure setting to medium to firm. If using a handheld heat press, firm pressure is recommended.
4. Cut out the logo you plan to apply.
5. Remove and discard the clear backing from the logo.
6. Position the logo on the garment, ensuring it is straight and properly aligned. Adjust as needed before applying heat.
7. Apply heat using the temperature and time settings above.
8. Peel off and discard the clear application tape while still hot.
9. If any part of the logo lifts, quickly press the logo again with the handheld heat press to ensure a secure bond.
10. Repeat for any additional items.

For recommendations on handheld heat presses, please contact us.