How to Apply Michigan Wing Decal Sets – Step-by-Step Guide

Properly applying your Michigan Wing Decal Set ensures a professional look and long-lasting durability. Follow these steps carefully for the best results.

Before You Begin: Proper Storage

• Store decals in a cool, air-conditioned place to maintain adhesive strength.
• Prevent curling by placing decals upside down and setting a flat, heavy object on top.

Application Steps

1. Prepare the helmet surface by cleaning the helmet thoroughly using mild soap and water or rubbing alcohol to remove dirt, oils, and debris.
2. For best results, apply ProPrep Helmet Polish to further clean and prepare the surface. ProPrep creates a protective barrier between the helmet and the decal, making it easier to apply and remove decals cleanly during the season.
3. Let the helmet dry completely before applying decals.
4. Position the center stripe by identifying the middle of the helmet and aligning the first 1-inch stripe along this centerline, extending from the front to the back.
5. Peel off the backing and carefully press the stripe onto the helmet, smoothing it out to avoid air bubbles. Pro Tip: Use a hairdryer on low heat to gently warm the decal, helping it mold to the helmet’s shape.
6. Position each wing decal so that its inner edge meets the center stripe. The tips of the wings should point towards the back of the helmet.
7. Peel the backing off one wing decal, starting at one end. Carefully press the decal onto the helmet, smoothing from the center outward to prevent air bubbles. Repeat for the other wing.
8. Align the remaining two 1-inch stripes a few inches from the center stripe, ensuring they are evenly spaced on either side and meet side-by-side to the center stripe at the back of the helmet.
9. Peel off the backing and press each stripe onto the helmet, smoothing out any air bubbles and trimming any excess material and tuck the stripes under the back bumper for a clean finish.
10. Final Touches & Care Tips
• Double-check all edges to ensure they are firmly pressed down.
• Allow the decals to set for several hours before using the helmet.
• Avoid excessive heat, such as storing helmets in hot cars, as it can weaken the adhesive.
• When cleaning, use mild soap and water—avoid harsh scrubbing around the decals to prevent peeling.



By following these steps, your helmets will have a clean, professional finish, ensuring your team looks as sharp as they play!